Wall Mount Speaker Stands
The cable that comes bundled with the audio system speakers has plugs that USB SMART incompatible with audio inputs Unifi 45 projector. Audio speakers are designed SMART USB to connect your computer via a USB connection. If you need multiple audio inputs for additional peripherals such as DVD or video recorders, the connection will not support USB peripherals if they are not connected to your computer. Your Unifi projector 45 does not have a USB input to connect the wall mount speaker stands directly. However, it can connect the speakers directly to the projector with an RCA audio cable from third parties (male) 3. 5 mm (male). You will need an audio cable with a minimum length of 274. 3 cm (108 inches). Depending on the installation, you may need a longer cable. By measuring the length of the cable include the length from the speaker to the wall mount bracket, the cable channel and a little more length to make it loose. Apart neck Unifi projector arm of cover panels that are on the mounting wall, along the cable channel. Exert upward pressure to remove the top cover panel that is on the wall mount bracket and then tighten up to remove the bottom cover panel. Put both panels in a safe place. The Unifi 45 projector, replace the bottom cover and then the top cover to the mounting bracket on the wall. Move the arm to the neck of the wall mount speaker stands until it makes contact with the cover panels. Do not connect the wall mount speaker stands cable to the USB port of your computer. Instead, connect computer peripherals and audiovisual following the instructions can be found in the User's Guide interactive whiteboard system, SMART Board 600i2 (document 118 924) or Laguía user and configuration upgrade kit Unifi 45 projector for SMART Board interactive whiteboard series 500 (document 125 960), section tituladaConectar your interactive whiteboard system. If you are installing your Unifi 45 projector and SMART Board interactive whiteboard on a wall mount bracket height adjustable systems, interactive whiteboards and SMART Board 600i2 600i (HAWM-600i2), connect the USB speakers to the wall and not to the SMART Board interactive whiteboard. If you connect the USB speakers to the board, the system becomes unbalanced HAWM-600i2 and their operations are affected. . . .
